Flat key connection often used to fit the gear shaft or coupling and joints. , Usually takes the key, this join is ever full, thus joins the parts need to be axial fixation. Splines splines collected fast and easy high load capacity, neutral good, but high manufacturing costs, requires special tooling.
Due to the different structure and manufacturing processes, joined with a flat key, splines in strength, technique and has the following characteristics: because on the shaft and hub and even more directly on teeth and slots, splined joint power more evenly;
Tank lighter, smaller tooth root stress concentration, strength weakening of the shaft and hub are few;
Tooth number, total contact area is large, so it can withstand greater load;
Parts on the shaft and the axial alignment of the good, it is very important for high speed and precision machinery;
Good guide, it is important to join;
Method to improve the accuracy of the available ground and connection quality;
Manufacturing process more complicated, sometimes it takes specialized equipment and high cost.
Require high centering precision, high torque or often slip joints.
Related Industry Knowledge
- TBI ball screw is also known as bal...
- About rack processing
- Four heat treatment processes of pl...
- Precision gearcar burizing and quen...
- Calculation of planetary gear ratio
- The Time Line of Gears
- Ball Screws Used for Latest Innovat...
- Comparison between Rolled and Groun...
- Recirculation System and Attributes...
- Design and processing technology of...
- Noise on gear box
- Characteristics of gear box
- Simple overview of the gear box
- experience on pulleys
- Pulley Assembly considerations
- Pulley installation and removal
- Pulley standard
- Belt wheel drive advantages
- Pulley of a brief introduction